Korg Digital Piano SP-170S Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 15
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
1
Internal Setup and Connections
1. Connecting the Power (Figure 1)
• ConnectthesuppliedACadaptertothepowercord.InserttheDCplugendintotheDC12V
jackontherearpaneloftheunit.Next,plugthepowercordintoanACoutlet.
PasstheACadaptercordthroughthecordhooksothattheplugwontberemovedfrom
thejackaccidentally.Whenyouunhookthecord,don’tpullthecordwithforce.
BesuretousetheACadapterthatcamewithyourunit.UsingotherACadaptersmaycause
theunittomalfunction.
BesuretoplugtheunitintoanACoutletoftheappropriatevoltage.
2. Turning the SP-170S ON
•
Pressthepowerswitchthatslocatedonthelesideofthetoppaneltoturntheuniton.(Figure2)
ThepowerLEDtotheleofthemusicstandwilllightup.(Figure2)
• Pressthepowerswitchagaintoturntheunito.
ThepowerLEDwillgodark.
3. Adjust the volume
• Rotate theVOLUMEknobthatslocated nexttothe powerswitch righttoward“MAX”to
raisethevolumelevel.Rotateitletoward“MIN”tolowerthelevel.(Figure2)
TheVOLUME knobcontrolstheoutputlevel of thebuilt-inspeakersandthe headphones
jacks.
Using headphones
Whenyoupluginheadphones,thebuilt-inspeakerswillbemuted.Thisisusefulwhenyou
wanttoplaythekeyboardintheeveningwithoutbotheringyourfamilyoryourneighbors.
TheSP-170Sfeaturestwoheadphonejackssothattwopeoplecanenjoyplayingandlistening.
• InsertthestereoheadphoneplugintooneofthePHONESjacksontherearpanel.(Figure3)
Ifyourheadphonesfeatureastandard-to-miniadapterplug,besuretoholdtheadapterplug
whenyouconnectordisconnecttheheadphones.
Toprotectyourhearing,donotlistentoloud,high-volumesoundsforalongperiodof
timethroughheadphones.
Using a Damper Pedal
YoucanusethesuppliedpedalasadamperpedalbyconnectingittotheDAMPERSWjack
ontherearpaneloftheunit.(Figure3)
Whileyoupressthepedal,thesoundwillsustain,creatingarich,lingeringsound.
Alternatively,youcanuseanoptionalDS-1Hdamperpedal.Ahalf-pedaldampereectcan
beappliedtoPiano1or2.
Connecting audio components
YoucanusethePHONESjacksasline-outjackstoconnectpoweredspeakersoraudiocom-
ponents tothekeyboard.Forsuchconnections,usecommercially-availablecables thatare
appropriateforthecomponentsthatyoureusing.
Beforeconnectingaudiocomponents,makesurethatyouturnothepowertotheunit
andtheaudiocomponents.Otherwise,damagetotheunitorothercomponentsmayoc-
cur.
Using the music stand
• Insertthelegsofthesuppliedmusicstandintothededicatedgroovethatslocatedinthe
middleofthetoppanel.(Figure4)
To AC
outlet
Figure 1
AC adapter
DC plug
Power cord for
the AC adapter
Cord hook
Be careful not to
bend this part too
much when you
insert the power
cord.
Figure 2
Power LED
VOLUME
knob
Power switch
DAMPER SW jack
Figure 3
PHONES jacks
Figure 4
Vista de pagina 2
1 2 3 4 5 6 7 8 ... 14 15

Comentarios a estos manuales

Sin comentarios